+

A volumetric dispensing system in which liquid flow is controlled by the speed of the dispensing valve. It can be used for dispensing silicone, acrylics, and UV‑curable acrylics. Applications include dotting, dispensing lines, or potting. An integrated Luer‑Lock adapter with an O‑ring (patented) ensures a tight seal during dispensing and features a back‑stop function to cleanly sever the adhesive at the needle tip, eliminating oozing and residue issues.

+

The glue gun push rod is compatible with 1.2–1.4:1 or 10:1 dual‑component glue guns in S0‑ml cartridges. It features independent pressure adjustment for precise control of the dispensing flow rate. Its fluid‑path components are specifically designed for MMA and epoxy adhesives. A patented, precision anti‑drip ADV device is currently under patent application (IDH144139; sold separately). Glue changes are exceptionally simple and fast. With its lightweight design, it can be used with any LeQin 8 precision dispensing robot system.

+

The glue gun push rod is compatible with 1.2–1.4:1 or 10:1 dual‑component glue guns in S0‑ml cartridges. It features independent pressure adjustment for precise control of the dispensing flow rate. Its fluid‑path components are specifically designed for MMA and epoxy adhesives. A patented, precision anti‑drip ADV device is currently under patent application (IDH144139; sold separately). Glue changes are exceptionally simple and fast. With its lightweight design, it can be used with any LeQin 8 precision dispensing robot system.

+

Designed for dispensing. Its dual Y-axis configuration effectively reduces loading and unloading time. An independent dispense‑cleaning control button on the front panel allows you to flush the nozzle at a single dispensing point, preventing adhesive from curing or assisting with initial setup. No special programming is required, and it supports nozzle misalignment calibration. The teach pendant’s program‑storage function enables convenient transfer of dispensing programs between robots. A light indicator can stop the robot if it runs too fast during program execution. Up to 100 programs are supported, with each program containing 4,000 memory points.

+

Designed for dispensing, it features an independent dispense‑clean‑out control button on the front panel that allows you to flush the nozzle of a single dispensing valve, preventing adhesive from curing or assisting with initial setup. No special programming is required, and it supports nozzle misalignment calibration. The teach pendant’s program‑storage function enables easy transfer of dispensing programs from one robot to another. An overspeed error indicator prevents the robot from running too fast during program execution. It can store up to 100 programs, each with 4,000 points of memory.

+

Designed for dispensing, it features a dedicated dispense‑clean‑out button on the front panel that allows you to flush the nozzle of a single dispensing valve, preventing adhesive clogging and facilitating initial setup—no special procedures required. It also supports nozzle misalignment calibration. The teach pendant’s program‑storage function enables easy transfer of dispensing programs from one robot to another, while an over‑speed error indicator helps prevent the robot from operating during program execution.